We focus on providing high quality batteries and related accessories. This New P313R(10pin) Laptop Battery for Jumper Ezbook 3 Pro 13.3 inch is designed for long-lasting and stable performance. It provides a one-year warranty and has passed CE / RoHS / ISO9001 safety certification. Fast delivery and thoughtful after-sales service will make you feel assured to purchase.


 

  • Brand: JUMPER Laptop Battery
  • Replaceable with the following models: P313R(10pin)
  • Rechargeable battery type : Li-Polymer
  • Color: Black
  • Current : 4500mAh/32.4WH
  • Voltage : 7.6V
  • Capacity : 32.4WH
  • Encoding : JUP19D826
  • Supported models : 3282122-2S HW-3687265 CLTD-3487265 P313R 3382122-2S WTL-3687265 3587265P
  • JUMPER P313R(10pin) compatible Laptop Battery model:
    interface : 10-pin full stitch(not Compatible 7Pin & 8Pin)
    Charge limit voltage: 8.7V
    Compatible Part Number:
    For JUMPER
    3282122-2S, 3382122-2S, CLTD-3487265, HW-3687265, P313R, WTL-3687265
    For TREKSTOR
    For PEAQ

    Fit Machine Models:
    For JUMPER
    ezbook 3 pro, EZbook 3 Pro 13.3, EZBook 3 Pro 64GB,
    EZBook 3 Pro LB10, EZBook 3 Pro S, EZBOOK 3 PRO SSD,
    EZBook 3 Pro V3, EZBook 3 Pro V4, EZBook 3 Pro Vs,
    EZBook 3 S, EZbook 3 SE, EZBOOK 3 SL, EZBook 3S,
    ezbook 3s MB10, EZbook 3SE, EZBOOK 3SL, EZbook i7,
    EZbook i7S, EZbook LB10, EZbook MB10 3S,
    EZbook X3, NOTEBOOK SLIM S130

    For TREKSTOR
    Primebook C11, SURFBOOK A13, SURFBOOK A13B,
    SURFBOOK A13B-CO, SURFBOOK A13B-PO

    For PEAQ
    s130, Slim S130, Slim S130-CA464PT, Slim S130-CG464PT

Online store:

JUMPER Battery

How to care for your JUMPER P313R(10pin) Laptop Battery?

This is the Replacement JUMPER P313R(10pin) Battery, You can extend the life of your laptop battery significantly through the proper care and handling of your battery.

1. Any new P313R(10pin) battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave laptops plugged in after they have been turned off so that the battery has a full charge the next time you use your laptop. It is probably fully charged within 5 hours.

2. A brand new P313R(10pin) notebook battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.

3. Run on battery power without the AC adapter cord at least once a week to keep the P313R(10pin) battery cells active and at their peak potential. When your laptop is plugged into the power adapter the battery goes to 'standby mode' while your laptop runs directly on electricity from the wall outlet.

4. Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.

5. If your P313R(10pin) battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.

6. Don't run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the P313R(10pin) battery even after 10 minutes will not reduce the battery's life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in laptops, even the earliest models.

7. Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively 'kill' your P313R(10pin) battery.

New Products